Passagemaker Pro

Far too often, marina accidents happen because boaters plan for wind while ignoring current.

Be as sure about financing and expenses as you are about the trawler you’re buying or selling.

Your technical questions answered by some of the most experienced trawler minds on the water.

Think ice is a Stone Age method of keeping food cold? Maybe you need to install some extra refrigeration. But first, read this.

Whether hauling out annually or less often, follow this haul-out game plan to get the most from your time "on the hard."

A great varnishing job is a blend of smart preparation and time-sensitive application. Here's the right way to do it.

Got an airlocked engine on your hands? Here's how to fix it.

Here’s what it really takes to prepare for a long-distance offshore cruise.

If you address the dual challenges of communication and sightlines, docking becomes a whole lot easier.

Attempting to re-install a rubber impeller in your engine room? First read this.

In the current issue, we tackle the challenges of offshore cruising, strategies to improve your foul-weather IQ, and more.

Need to press onward despite limited visibility? Here's what you need to know.

The problem was easy to see. Figuring out the solution was another matter.

When it comes to your windlass, what you "don’t" see is what needs the most TLC.

Smart maintenance will ensure that nasty stenches can’t collect in the bilge.

Your technical questions answered by some of the most experienced trawler minds on the water.

Here's how to make sure your coolant recovery bottle is properly installed and in good working order.

Think you'll always remember to return later to finalize the installation? Think again.

Ahead of a busy cruising schedule, an ’80s vintage Grand Banks 36 gets a new lease on life.

This little DIY project will help you descale air-conditioning units or engines and save you a pile of money.

Gelcoat, like everything else on the boat, needs smart maintenance on a regular schedule.

I have a Mainship 34 with a Yanmar 6LYSTP. In 2018, I noticed rust spots on top of the exhaust elbow...

Using a power buffer to properly clean and polish your gelcoat is best for your boat, and your sanity.

A combination inverter/charger can be great on board, but when it fails, you need options.